Thursday, April 9, 2015

Vision Spinner 2 Mini eGo Battery Variable Voltage

The Vision Spinner 2 Mini Battery has the same great features as the full size Vision Spinner 2 battery but is now compact in size to cater to vapers that don't want to carry big batteries around. The Vision Spinner 2 mini is the most portable variable voltage device available right now.


Approximate Dimensions: 4-1/8" (L) x 5/8" (D)

The voltage dial of the Vision Spinner 2 is located at the base of the battery. There are four markings -- 3.3, 3.8, 4.3, and 4.8 volts -- but the output is adjustable throughout the entire voltage range. The spin dial is easy to turn and features a clear numbered display.

The Vision Spinner 2 is compatible with all 510 eGo atomizers and Cartomizers.

Features:
More powerful and longer-lasting battery cell
Upgraded PCB circuitry
New power switch with battery charge indicator
Ergonomic voltage spin dial
510 threaded
Variable voltage output

Warning: setting the Vision Spinner 2 at a very high voltage will drain the battery quicker. Standard Joye eGo batteries usually work on a regulated voltage of around 3.2 volts.

Specifications:
Power button with battery indicator (white 60-100%, blue 30-60%, orange 0-30%)
Variable voltage: 3.3 volts to 4.8 volts
Cutoff time: approximately 8 seconds
Dimensions: 4-1/8" (L) x 5/8" (D)

When a short circuit is detected, the Vision Spinner 2 will automatically shutdown.

To lock or unlock the Vision Spinner 2 battery, press the button 5 times within 1.5 seconds. The LED light will flash to confirm each action. When the battery is in lock mode, the power button is disabled.

If the power button is pressed for 10 seconds, the battery will shutdown until the button is released to prevent damage to the atomizer.

The Vision Spinner 2 has a built-in battery monitor. The device will turn itself off when the battery is discharged. The LED light will flash 5 times when the battery needs recharging.

0 Comments:

Post a Comment