How to use EXO Skeleton ES300
How to use EXO Skeleton ES300 battery?
1. Power on/off: Push forward the battery cover and put three high-rate 18650 cells into the battery body. Press the fire button 5 times in quick succession to turn the device on and off.
2. Decorative Case Installment/Replacement: As shown, push the case forward along the battery body and then tighten the 3 screws on the case. Unscrew the 3 screws on the case, push the case down along the battery body and then replace a new one.
3. Stealth function: While the device is on, simultaneously hold the fire button and the left regulatory button. This will switch the screen display on and off.
4. Key lock function: While the device is on, simultaneously press the two regulatory buttons. This will switch between Key Lock and Key Unlock function.
5. Micro USB Port function: The USB port can be used for charging and upgrading firmware. It is better to take out the cells and charge them through external charger.
6. Switch the display mode: By pressing the left and right regulatory buttons simultaneously in shutdown state, the screen display will rotate 180 degrees. You can then view the screen of the Wismec EXO Skeleton ES300 from two kinds of angle through this operation.
Shift among VW/TC-Ni/TC-Ti/TC-SS/TCR Mode
Press the fire button 3 times to enter into the mode options. Then press the right regulatory button to switch between VW/TC (Ni, Ti, SS)/TCR (M1, M2, M3) mode. Press the fire button to confirm.
Under TC/TCR mode, while the mode sign flashing, press the left regulatory button to enter into its submenu. Then press the right regulatory button to choose TC-Ni/Ti/SS (TC mode) or M1/M2/M3(TCR mode). Press the fire button to confirm.
1. Power on/off: Push forward the battery cover and put three high-rate 18650 cells into the battery body. Press the fire button 5 times in quick succession to turn the device on and off.
2. Decorative Case Installment/Replacement: As shown, push the case forward along the battery body and then tighten the 3 screws on the case. Unscrew the 3 screws on the case, push the case down along the battery body and then replace a new one.
3. Stealth function: While the device is on, simultaneously hold the fire button and the left regulatory button. This will switch the screen display on and off.
4. Key lock function: While the device is on, simultaneously press the two regulatory buttons. This will switch between Key Lock and Key Unlock function.
5. Micro USB Port function: The USB port can be used for charging and upgrading firmware. It is better to take out the cells and charge them through external charger.
6. Switch the display mode: By pressing the left and right regulatory buttons simultaneously in shutdown state, the screen display will rotate 180 degrees. You can then view the screen of the Wismec EXO Skeleton ES300 from two kinds of angle through this operation.
Shift among VW/TC-Ni/TC-Ti/TC-SS/TCR Mode
Press the fire button 3 times to enter into the mode options. Then press the right regulatory button to switch between VW/TC (Ni, Ti, SS)/TCR (M1, M2, M3) mode. Press the fire button to confirm.
Under TC/TCR mode, while the mode sign flashing, press the left regulatory button to enter into its submenu. Then press the right regulatory button to choose TC-Ni/Ti/SS (TC mode) or M1/M2/M3(TCR mode). Press the fire button to confirm.
No comments